Vakum Pompaları & Blower & Endüstriyel Süpürgeler
Doğuşsan Türkçe Doğuşsan English Doğuşsan Arabic
 
+ 90 216 348 74 26
 

BARATTI-GERMANY / Root Blowerlar

Baratti engineering gmbh is your competent partner for economic and future oriented solutions in terms of polution free and low cost in vacuum and low pressure technology. We develope, manufacture and sell rotary lobe blowers as well as dry running vacuum screw pumps for the entire market of gas compression.


Initially rotary lobe blower were designed as twin lobe, two shaft gas compressors. Two parallel installed rotors with identical lobe profils are rotating inside the housing in opposite directions. As they rotate, gas is drawn into the space between each lobe and the casing where it is trapped, transported and discharged by the rotation. For each of the two lobes, this process is being repeated twice per full rotation. The disadvantage of this solution was a high pulsation at the discharge and high noise level.

The developement of a three lobe system was the consequence, reducing the volume of the discharge per pulse and increasing the frequence of pulses by 30% at the same speed. So the problem of pulsation was reduced, but at the same time the volumetric efficiency was also reduced!

 

Our productrange of ATMOS, MODULA and Stratos are suited for applications of central supply, either to individual consumers or else to a total production in any application of gas compression for industrial vacuum and low pressure. The delivery range per unit is from 30 - 6000 m3/h. In terms of pressure range, we supply systems from 0.01 mbar abs. in vacuum up to 3 bar overpressure.

 

Ürünleri görmek için buraya tıklayın.